Cracking Rigs

10x HPCPUs 2x Power Supplies seems to be what everyone has scoped in on. Cooling and layout looks to be the big divider rn. I have a set up with the former but 3 heat sinks in the middle. I am traveling rn so I will type a pictogram and if someone reminds me I will post a pic.

C=HPCPU H=Heat Sink P= Power Supply
W=Water Pump

CWCWC
CWHWC
P PHP P
CWHWC
CWCWC

I had limited water pumps and didn't want to buy more or waste N stealing some at cyber since I'm cs 100 shoplift so I used the 3 Heat sinks to allow me to use the cooling of all 8 coolers on my power sups and eachother. This machine makes heat but only at like 11% and that's on the water coolers so it just shuts 4 of those off then it starts heating PSUs and the CPUs in the 4 corners. I have not used it enough to overheat the CPUs or Power supplies yet and that was with 60-100 Nerve in a short period

There is an app for this?

[image: cdn.discordapp.com]

20 uses with no edu infinite with edu (heat edu)

Also hi fethers!

Wtf is this!

More seriously, do the PC sleeves stack in eachother like layers so that a water cooler in rack 2 can cool a PSU in rack 1/3?

Sus computer is sus

Bugs Rig Simulator

Each rig is independent of each other in terms of heating and cooling, but combine MIPS and BFS etc

My bad I thought those cpus on 1/3 were water coolers. damn numbers

"Rig Uses: 0"...

So completely useless to everyone?

Edit: Numbers fixed


[image: cdn.discordapp.com]

Idk what your rig looks like rn but if you add these 2 cpus it will give you a few more mips and you would need to use 700+ nerve in a row to overheat it.

This next one has 15 uses until overheat which is 105 Nerve. It is a little better on cracking[image: cdn.discordapp.com]

I feel like I'm trying to make a micro rig rn lol. This is probably the best bang for buck computer I have seen

Sus computer works, once. Did change layout a little and added another HPCPU to the middle

[image: i.imgur.com]
Sim link



This is the one I’ll probably end up running, let’s me run 2/3 times before I need to swap out some HPCPU for fans to cool it


[image: i.imgur.com]

Can someone help me pls?

I just completed the basic overclocking education - but the slider on rig power is static and I can't move it. Do I need to do something in addition?

Do you have enough PSUs to power the overclocked components? Could you show us a screenshot of your rig?

How's this going? I'm nearing my 2nd rig and don't yet have the heat reduction educations, so am interested in optimal, low/no-heat 2 rig builds.

EDIT - Actually, I forgot the education order, I unlock the cooling in 5 hours. No overclocking for me yet though, so really need a good zero overclock build...

Cooling 101...


[image: pbs.twimg.com]

Scan through the thread and find a two rig chassis that works for you. There are plenty that have been added to this thread.

Of course! Long-term, though, once properly studied/stablized, someone (maybe Emforus will add final versions to his guide) make a singular, conclusive post with like:

* Best low/no heat
* Best moderate-use
* Best max BFS

For 1/2/3 case rig builds, so that future users don't have to delve through 20+ pages to find options

I was nearly maxed out. I've added another PSU to see if that was the case - but still now I can't slide that power bar :/

[image: i.ibb.co]

Interesting, by all my knowledge you should be able to overclock.
You have more than enough energy so I don't see any problems with that. Maybe try adding some HPCPUs to see if that'll work, but as far as I'm aware you should be able to OC other CPUs as well, also are you really sliding it to the right side into that orange area?

If nothing in this message helps then maybe you should check out Bugs and Issues forum or speak with someone more qualified than me.
Hope you'll find a solution soon.

Nothing huge in terms of progress, but basically I copied the second rig to the first one, and added a normal CPU to the top and bottom of the column of fans. I get a bit more BFS and am still able to use 250+ nerve without anything overheating while at 50% OC.

If you're not OC'ing this I'd assume you can add more CPUs along the boarder and squeeze more BFS out of this ghetto little setup

Disable your scripts, reload page, you should be good

Pretty sure I snagged this from someone else, so I don't think I can take credit for it, but here's a good zero heat (expensive) setup for infinity uses. Requires all education courses.

3 Rig setup (Currently using this at 2 rigs: MIPS: 1,287,500 from rig / Brute forcing strength: 4.9807)

MIPS: 1,931,250 from rig
Brute forcing strength: 5.864
Overheated components: 0 / 75
Hottest component: 0%
Rig power: 4500w / 4500w (100%)

Heat Gain: -9.84
Rig Uses: Infinity

Component Count
ECPU 15
CPU 30
HCPU 3
Fan 0
Water Block 15
Heat Sink 0
PSU 6

https://sliw.co/rig?r=heccccwewepPweccwvweccVccheccccwewepPweccwvweccVccheccccwewcpPweecwvweccVccC5